| EOSINT P700 |
| Maximum part size, mm | 700 x 380 x 560 (height) |
| Building time | 1-3 hours/10mm height |
| Layer thickness, mm | 0.15 |
| Laser type | 2 x 50W lasers CO2 |
| Materials (powders) | polyamide, glass-filled polyamide |
| | |
| Sinterstation 2500Plus |
| Maximum part size, mm | 380 x 330 x 450 (height) |
| Building time | 1-3 hours/10mm height |
| Layer thickness, mm | 0.1 |
| Laser type | CO2, 100W |
| Materials (powders) | Polyamide, glass-filled polyamide, polystyrene (CastForm), steel (LaserForm) |
| Accuracy | IT13, min + - 0.2mm, higher accuracy after iteration |